ive been trying to figure the spacing for a cabinet i need to draw for half an hour now and for some reason it fails me could some one point out what im doing wrong please, im trying to creat the face of the draw atm
im trying to draw a cabinet with 3 draws in it the width isnt important but the height of the area im working with is 644 mm there is a space of 25mm between the top draw and the bottem of the table top, and another 25 between each draw, the bottem draw come flush with the bottem of the cabinet. how large do the faces of the draws have to be to make it even?
person that figure it out gets... my graitudde, yea sorry havent got much to offer =(
EDIT: if my explination is to crap ill try and explain better maybe make a picture.
EDIT2: im not sure what the proper name ismy mother language is english but ive been living in the netherlands for almsot 3 years now and some how my english is getting worse
the complete measuremesnt are 1500mm wide 500mm deep and 800mm high
the top of the table thing has a thickness of 56mm and there is a gap of 100mm from the ground up so the space im working in is 643.4
ill try and draw a picute here
_____________
table top from 56mm
_____________
25mm
_____________
draw
_____________
25mm
_____________
draw
_____________
25
_____________
bottem of draw = bottem of cabinet
____________
100mm
____________
floor
no idea if that helps
im trying to draw a cabinet with 3 draws in it the width isnt important but the height of the area im working with is 644 mm there is a space of 25mm between the top draw and the bottem of the table top, and another 25 between each draw, the bottem draw come flush with the bottem of the cabinet. how large do the faces of the draws have to be to make it even?
person that figure it out gets... my graitudde, yea sorry havent got much to offer =(
EDIT: if my explination is to crap ill try and explain better maybe make a picture.
EDIT2: im not sure what the proper name ismy mother language is english but ive been living in the netherlands for almsot 3 years now and some how my english is getting worse
the complete measuremesnt are 1500mm wide 500mm deep and 800mm high
the top of the table thing has a thickness of 56mm and there is a gap of 100mm from the ground up so the space im working in is 643.4
ill try and draw a picute here
_____________
table top from 56mm
_____________
25mm
_____________
draw
_____________
25mm
_____________
draw
_____________
25
_____________
bottem of draw = bottem of cabinet
____________
100mm
____________
floor
no idea if that helps
