Thanks for the commendations guys. I spent way too much time getting an obscene level of detail on the MBUS sight.sooperman & WanderingFool said:
Pimp My Gun: Show your Creations [Image Posting tips in the First post]
- Thread starter Atvomat_Nikonov
- Start date
!WARNING!WARNING!WARNING!WARNING!WARNING!WARNING!WARNING!WARNING!WARNING!WARNING
!MASSIVE DUMP INBOUND 65 IMAGES!
Just letting you know before I rape your bandwidth.
!WARNING!WARNING!WARNING!WARNING!WARNING!WARNING!WARNING!WARNING!WARNING!WARNING
About 3% of these I cannot remember making, so I apologize if I have stolen anyone's work.
!MASSIVE DUMP INBOUND 65 IMAGES!
Just letting you know before I rape your bandwidth.
!WARNING!WARNING!WARNING!WARNING!WARNING!WARNING!WARNING!WARNING!WARNING!WARNING
NEW
OLD DUMP
OLD DUMP
Okay f**k you, I thought I was pretty good, but with one post you make me feel like a hack!Stickyreiss said:
Well done though, the tanks are especially impressive.
OT: Here are my creations
Gallery 1: http://atholthedestroyer.deviantart.com/gallery/27575947
Gallery 2: http://atholthedestroyer.deviantart.com/gallery/517462
Stickyreiss said:!WARNING!WARNING!WARNING!WARNING!WARNING!WARNING!WARNING!WARNING!WARNING!WARNING
!MASSIVE DUMP INBOUND 65 IMAGES!
Just letting you know before I rape your bandwidth.
!WARNING!WARNING!WARNING!WARNING!WARNING!WARNING!WARNING!WARNING!WARNING!WARNING
snip
About 3% of these I cannot remember making, so I apologize if I have stolen anyone's work.
Fuck... some of those are kinda weird, all of them are tits awesome (A friend startd using tits to describe awesome, and I think its starting to rub off
)I like the gunblade and the one knife.
A couple of reposts (or not posted, been so long, cant remember)
A SMG and Pistol
Its a magazine fed pump-action 12 gauge. The pumping handle can be replaced with another version that has built-in RIS, allowing one to attach a front grip. It can use both Red-dot and Acog sights, and has suppresser mounting ability. It is able to use five types of ammo:
Type 1) Standard 12 gauge shells (Red)
Type 2) Sub-sonic 12 gauge shells (Red with grey band)(for best use with supresser)
Type 3) 12 gauge rifled slugs (Yellow)
Type 4) Non-lethal shells (Blue)
Type 5) Breaching shells (Black with red band)
The ejection port has a dust cover which, during pumping, is opened at the same time as the operater pumps the gun, running parallel with the reloading mechanism.
And a updated version with new sights and stock.
The "Street Sweeper" That I based off of the Striker shotgun
Used the stock for the Pump-action remake.
And just for kicks,
My Over-under handcannon.
A SMG and Pistol
Its a magazine fed pump-action 12 gauge. The pumping handle can be replaced with another version that has built-in RIS, allowing one to attach a front grip. It can use both Red-dot and Acog sights, and has suppresser mounting ability. It is able to use five types of ammo:
Type 1) Standard 12 gauge shells (Red)
Type 2) Sub-sonic 12 gauge shells (Red with grey band)(for best use with supresser)
Type 3) 12 gauge rifled slugs (Yellow)
Type 4) Non-lethal shells (Blue)
Type 5) Breaching shells (Black with red band)
The ejection port has a dust cover which, during pumping, is opened at the same time as the operater pumps the gun, running parallel with the reloading mechanism.
And a updated version with new sights and stock.
The "Street Sweeper" That I based off of the Striker shotgun
Used the stock for the Pump-action remake.
And just for kicks,
My Over-under handcannon.
God Sticky, way to bump.Stickyreiss said:!WARNING!WARNING!WARNING!WARNING!WARNING!WARNING!WARNING!WARNING!WARNING!WARNING
!MASSIVE DUMP INBOUND 65 IMAGES!
Just letting you know before I rape your bandwidth.
!WARNING!WARNING!WARNING!WARNING!WARNING!WARNING!WARNING!WARNING!WARNING!WARNING
snip
About 3% of these I cannot remember making, so I apologize if I have stolen anyone's work.
Some of these we haven't seen before (or I don't remember them), so it's cool to see some new and revisit some old.
M4A1 Grenadier with ACOG. Just because I like using it in MW2. Please, sandblast it with your hate.
Oh god, I'm starting to hate PMG when it gets to detail work. Using the mouse to move bits means you get lots of precision but bugger all accuracy, while directional keys gives you vice-versa. Then try using a mix of the two.
My zooming technique only works so much, and I'm starting to simply resize the bits to something like 500-800. The big problem with this is that when shrinking groups back down, you have to shrink the objects down by the same factor you scaled them up by from 100%. And that leaves hideously decimal sizes around everywhere and screws up further manual resizing.
Anyone else finding the same problems?
Oh god, I'm starting to hate PMG when it gets to detail work. Using the mouse to move bits means you get lots of precision but bugger all accuracy, while directional keys gives you vice-versa. Then try using a mix of the two.
My zooming technique only works so much, and I'm starting to simply resize the bits to something like 500-800. The big problem with this is that when shrinking groups back down, you have to shrink the objects down by the same factor you scaled them up by from 100%. And that leaves hideously decimal sizes around everywhere and screws up further manual resizing.
Anyone else finding the same problems?
Yep, that happens to me alot. My mouse has a built in magnifier though, so that helps.NimbleJack3 said:M4A1 Grenadier with ACOG. Just because I like using it in MW2. Please, sandblast it with your hate.
Oh god, I'm starting to hate PMG when it gets to detail work. Using the mouse to move bits means you get lots of precision but bugger all accuracy, while directional keys gives you vice-versa. Then try using a mix of the two.
My zooming technique only works so much, and I'm starting to simply resize the bits to something like 500-800. The big problem with this is that when shrinking groups back down, you have to shrink the objects down by the same factor you scaled them up by from 100%. And that leaves hideously decimal sizes around everywhere and screws up further manual resizing.
Anyone else finding the same problems?
INCOMING DUMP. BRACE FOR CONNECTION RAPE.
Please, let me know what you think, what you like and what you hate in regards to the above.
M16A4 Grenadier
Some rubbishy gun set I made a loooong time ago. Laugh if you like.
A nice-looking (well, I think so) MK23 Standalone.
A bullpup M4 conversion. It looks horrible, but I lost the code for it and the stock alone took like an hour to get right.
Two rifles with grenade launchers - the second one being built in.
A set of 10 ACR variants in various shades of 'what the fuck'.
A single-chamber break-top rifle in .700 Nitro Express.
A terrible, samey AK in snow colours with suppressed barrel and grenade launcher.
Some rubbishy gun set I made a loooong time ago. Laugh if you like.
A nice-looking (well, I think so) MK23 Standalone.
A bullpup M4 conversion. It looks horrible, but I lost the code for it and the stock alone took like an hour to get right.
Two rifles with grenade launchers - the second one being built in.
A set of 10 ACR variants in various shades of 'what the fuck'.
A single-chamber break-top rifle in .700 Nitro Express.
A terrible, samey AK in snow colours with suppressed barrel and grenade launcher.
Please, let me know what you think, what you like and what you hate in regards to the above.
That .700 Nitro is beautiful, as are the ACRs. I also like the custom trigger guard on that one M417. Nice guns!NimbleJack3 said:INCOMING DUMP. BRACE FOR CONNECTION RAPE.
M16A4 Grenadier
Some rubbishy gun set I made a loooong time ago. Laugh if you like.
A nice-looking (well, I think so) MK23 Standalone.
A bullpup M4 conversion. It looks horrible, but I lost the code for it and the stock alone took like an hour to get right.
Two rifles with grenade launchers - the second one being built in.
A set of 10 ACR variants in various shades of 'what the fuck'.
A single-chamber break-top rifle in .700 Nitro Express.
A terrible, samey AK in snow colours with suppressed barrel and grenade launcher.
Please, let me know what you think, what you like and what you hate in regards to the above.
well shitMaxMees said:I'm not a fan of this, the design seems a bit like you've put pieces together without much thought.Stickyreiss said:you inspired me to make my own PMG 2.0 Shotgun.
I actually put quite a bit of thought into it. While I admit I could have done much better, I didn't feel like spending an hour on it.
also >3939
doubles get
That's really awesome. You've really put some effort into this - the blending for the receivers and the little symbols for the fire selectors show it. I like the way you've put a little F2000 cap on the end, it rounds the corner off really well.MaxMees said:Long time no post.
Here's my answer to the M14/M21.
Criticisms please.
My only criticism is that it might be a bit awkward fitting your thumb into the corner made by the receiver and the pistol grip. Rounding it off, like the AR-15 family does, might make it look a bit better.
Props to you.
[HEADING=1]ATTENTION ALL PMG FANS![/HEADING]
There's an update in the works! This update will allow custom parts to be made in PMG. Amazing, no?
Here, have the link.
http://sf-battlenet.blogspot.com/2010/12/pmg-custom-modding.html#more
There's an update in the works! This update will allow custom parts to be made in PMG. Amazing, no?
Here, have the link.
http://sf-battlenet.blogspot.com/2010/12/pmg-custom-modding.html#more
I think you need to illustrate it in flash anyway - the update allows you to share the flash drawings via PMG, or something.