Pimp My Gun: Show your Creations [Image Posting tips in the First post]

Akai Shizuku

New member
Jul 24, 2009
3,183
0
0
Stickyreiss said:
Akai Shizuku said:
Stickyreiss said:
Akai Shizuku said:
Unlike most of you chaps, I like to make weapons that might actually work.
...but are still <url=http://media.share.ovi.com/m1/s/0508/3fccbb39b2214b05bfdd3c18c960f037.jpg>incredibly awesome.
-snip-

This is the ETGG-754 general-purpose machine gun. Its internal systems are based off of the FN MINIMI and the GShG-7.62 machine gun. It has four-barrels and is entirely gas-operated. It can be used mounted or unsupported, and can fire at 800 RPM by pulling the trigger normally and 1400 RPM by pulling it all the way. The ETGG-754 fires 7.62x54mmR, giving it good range and excellent power. It is either fed from a belt, a box magazine of 50 rounds, or a 100-round box. This is the weapon you need when cocks rocket skyward.

>I like to make weapons that might actually work.
>might actually work.
>ETGG-754 general-purpose machine gun.jpg
>four-barrels
>It can be used ... unsupported

PFFFFFTTTTTHHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHA
-snip-
It's a possibility for the future, okay? >_> Keep in mind the rates of fire and the round used.
still, 4 barrels and used standing up, no, not until we get spacemarine armor
anyways just get an FG42, 1500 RPM
The highest fire rate of an FG 42 is 900 RPM.

I still think that, while heavy, my MG is plausible.
 

Hunde Des Krieg

New member
Sep 30, 2008
2,442
0
0
that m9 barreta on the first page wouldn't work. The stock can't attatch there and the scope mount is attatched to the slide. Epic fail.
 

Stickyreiss

New member
Aug 19, 2009
524
0
0
Akai Shizuku said:
Stickyreiss said:
Akai Shizuku said:
Stickyreiss said:
Akai Shizuku said:
Unlike most of you chaps, I like to make weapons that might actually work.
...but are still <url=http://media.share.ovi.com/m1/s/0508/3fccbb39b2214b05bfdd3c18c960f037.jpg>incredibly awesome.
-snip-

This is the ETGG-754 general-purpose machine gun. Its internal systems are based off of the FN MINIMI and the GShG-7.62 machine gun. It has four-barrels and is entirely gas-operated. It can be used mounted or unsupported, and can fire at 800 RPM by pulling the trigger normally and 1400 RPM by pulling it all the way. The ETGG-754 fires 7.62x54mmR, giving it good range and excellent power. It is either fed from a belt, a box magazine of 50 rounds, or a 100-round box. This is the weapon you need when cocks rocket skyward.

>I like to make weapons that might actually work.
>might actually work.
>ETGG-754 general-purpose machine gun.jpg
>four-barrels
>It can be used ... unsupported

PFFFFFTTTTTHHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHA
-snip-
It's a possibility for the future, okay? >_> Keep in mind the rates of fire and the round used.
still, 4 barrels and used standing up, no, not until we get spacemarine armor
anyways just get an FG42, 1500 RPM
The highest fire rate of an FG 42 is 900 RPM.

I still think that, while heavy, my MG is plausible.
actually i did fuck up, its an MG42 i took the number off the top of my head, its 1200, but yeah, it wasn't all MG42s, but many had a lighter bolt, and could achieve 1200
 

Smagmuck_

New member
Aug 25, 2009
12,681
0
0
<spoiler=M16>http://img6.imageshack.us/img6/9485/m16m203acog.jpg

Critizize away Stickyriesse...
 

Akai Shizuku

New member
Jul 24, 2009
3,183
0
0
Stickyreiss said:
Akai Shizuku said:
Stickyreiss said:
Akai Shizuku said:
Stickyreiss said:
Akai Shizuku said:
Unlike most of you chaps, I like to make weapons that might actually work.
...but are still <url=http://media.share.ovi.com/m1/s/0508/3fccbb39b2214b05bfdd3c18c960f037.jpg>incredibly awesome.
-snip-

This is the ETGG-754 general-purpose machine gun. Its internal systems are based off of the FN MINIMI and the GShG-7.62 machine gun. It has four-barrels and is entirely gas-operated. It can be used mounted or unsupported, and can fire at 800 RPM by pulling the trigger normally and 1400 RPM by pulling it all the way. The ETGG-754 fires 7.62x54mmR, giving it good range and excellent power. It is either fed from a belt, a box magazine of 50 rounds, or a 100-round box. This is the weapon you need when cocks rocket skyward.

>I like to make weapons that might actually work.
>might actually work.
>ETGG-754 general-purpose machine gun.jpg
>four-barrels
>It can be used ... unsupported

PFFFFFTTTTTHHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHA
-snip-
It's a possibility for the future, okay? >_> Keep in mind the rates of fire and the round used.
still, 4 barrels and used standing up, no, not until we get spacemarine armor
anyways just get an FG42, 1500 RPM
The highest fire rate of an FG 42 is 900 RPM.

I still think that, while heavy, my MG is plausible.
actually i did fuck up, its an MG42 i took the number off the top of my head, its 1200, but yeah, it wasn't all MG42s, but many had a lighter bolt, and could achieve 1200
But mine is far cooler.
 

Akai Shizuku

New member
Jul 24, 2009
3,183
0
0
Smagmuck08 said:
<spoiler=M16>http://img6.imageshack.us/img6/9485/m16m203acog.jpg

Critizize away Stickyriesse...
I'll substitute.

The front iron sight. It needs to go, or be replaced with a folding one, because it's in the way of the scope. If you want to keep the front iron sight, make sure you have a rear one too for backup.
 

Atvomat_Nikonov

New member
Jul 2, 2008
975
0
0
Hunde Des Krieg said:
that m9 barreta on the first page wouldn't work. The stock can't attatch there and the scope mount is attatched to the slide. Epic fail.
Rule of cool combined with a then poor knowledge of guns. My failure is justified.

 

Hunde Des Krieg

New member
Sep 30, 2008
2,442
0
0
Atvomat_Nikonov said:
Hunde Des Krieg said:
that m9 barreta on the first page wouldn't work. The stock can't attatch there and the scope mount is attatched to the slide. Epic fail.
Rule of cool combined with a then poor knowledge of guns. My failure is justified.

Yes. much better.
 

Wadders

New member
Aug 16, 2008
3,796
0
0
Akai Shizuku said:
Smagmuck08 said:
<spoiler=M16>http://img6.imageshack.us/img6/9485/m16m203acog.jpg

Critizize away Stickyriesse...
I'll substitute.

The front iron sight. It needs to go, or be replaced with a folding one, because it's in the way of the scope. If you want to keep the front iron sight, make sure you have a rear one too for backup.
Not strictly true. Notice this US marine has an ACOG, but the front sight is still on the gun. It doesn't get in the way enough to be a major hindrance. Smagmuck08's ACOG sight is missing a mount though... :p
Heres some gunz. :D

M14 EBR - No M14 parts made it pretty hard to make :(

Custom (ish) MP5 SD

Modernized Battle rifle.

bolt action rifle.

Bullpup 40mm Grenade launcher. the barrel isn't in line with the bolt :(
 

Stickyreiss

New member
Aug 19, 2009
524
0
0
Akai Shizuku said:
Smagmuck08 said:
<spoiler=M16>http://img6.imageshack.us/img6/9485/m16m203acog.jpg

Critizize away Stickyriesse...
I'll substitute.

The front iron sight. It needs to go, or be replaced with a folding one, because it's in the way of the scope. If you want to keep the front iron sight, make sure you have a rear one too for backup.
I like it :)
_______________________________________________________________________________________

and who said you could step in for me? especially when you're wrong!
 

Stickyreiss

New member
Aug 19, 2009
524
0
0
Akai Shizuku said:
Stickyreiss said:
Akai Shizuku said:
Stickyreiss said:
Akai Shizuku said:
Stickyreiss said:
Akai Shizuku said:
Unlike most of you chaps, I like to make weapons that might actually work.
...but are still <url=http://media.share.ovi.com/m1/s/0508/3fccbb39b2214b05bfdd3c18c960f037.jpg>incredibly awesome.
-snip-

This is the ETGG-754 general-purpose machine gun. Its internal systems are based off of the FN MINIMI and the GShG-7.62 machine gun. It has four-barrels and is entirely gas-operated. It can be used mounted or unsupported, and can fire at 800 RPM by pulling the trigger normally and 1400 RPM by pulling it all the way. The ETGG-754 fires 7.62x54mmR, giving it good range and excellent power. It is either fed from a belt, a box magazine of 50 rounds, or a 100-round box. This is the weapon you need when cocks rocket skyward.

>I like to make weapons that might actually work.
>might actually work.
>ETGG-754 general-purpose machine gun.jpg
>four-barrels
>It can be used ... unsupported

PFFFFFTTTTTHHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHA
-snip-
It's a possibility for the future, okay? >_> Keep in mind the rates of fire and the round used.
still, 4 barrels and used standing up, no, not until we get spacemarine armor
anyways just get an FG42, 1500 RPM
The highest fire rate of an FG 42 is 900 RPM.

I still think that, while heavy, my MG is plausible.
actually i did fuck up, its an MG42 i took the number off the top of my head, its 1200, but yeah, it wasn't all MG42s, but many had a lighter bolt, and could achieve 1200
But mine is far cooler.
lol, I don't see any badasses carrying yours
 

Stickyreiss

New member
Aug 19, 2009
524
0
0
Wadders said:
~snipu~
Not strictly true. Notice this US marine has an ACOG, but the front sight is still on the gun. It doesn't get in the way enough to be a major hindrance. Smagmuck08's ACOG sight is missing a mount though... :p
Heres some gunz. :D

M14 EBR - No M14 parts made it pretty hard to make :(

Custom (ish) MP5 SD

Modernized Battle rifle.

bolt action rifle.

Bullpup 40mm Grenade launcher. the barrel isn't in line with the bolt :(
i like them, especially the GL
have some Russian Tank Commander ~Moe~ as a prize :3
 

RaZor921

New member
Dec 30, 2009
45
0
0

This is the MAG-30. I dunno why i named it MAG-30, just thought it sounded cool

Also: My first post on The Escapist. Been around for a while, but i've had some problems with email verification up until now
 

Smagmuck_

New member
Aug 25, 2009
12,681
0
0
<spoiler=M4>http://img132.imageshack.us/img132/4964/m4acogfore.jpg

Critisize away Stickyreiss...
I'm saving up for one so I can ship it to my elder brother who'll be shipping out to Afghanistan in July... I don't think I'll have enough by then.
 

Stickyreiss

New member
Aug 19, 2009
524
0
0
Smagmuck08 said:
<spoiler=M4>http://img132.imageshack.us/img132/4964/m4acogfore.jpg

Critisize away Stickyreiss...
I'm saving up for one so I can ship it to my elder brother who'll be shipping out to Afghanistan in July... I don't think I'll have enough by then.
I'm almost positive they will issue him one, and unless he is some sort of special forces, he can't pick his own weapon =/

IdealistCommi said:
Stickyreiss said:
have some Russian Tank Commander ~Moe~ as a prize :3
.....Hot. Very, very hot

*Saves picture*
*Images speaking in a Russian accent*
so you like Military girls? i have lots of those ;3