Nice guns! I really like the MGL.mb16 said:a few i have made over the last month
FAL or G3 that i tried to make
a random 9mm SMG
6 chamber grenade launcher
my first try at a drum mag on a random LMG i put together
Pimp My Gun: Show your Creations [Image Posting tips in the First post]
- Thread starter Atvomat_Nikonov
- Start date
I'm going to agree with Sn1P3r here, it's an extremely well made set of guns. You've got a great idea of shape and lines - I couldn't replicate a G3/FAL clone myself. Keep it up, I'd like to see more of you here.mb16 said:a few i have made over the last month
FAL or G3 that i tried to make
a random 9mm SMG
6 chamber grenade launcher
my first try at a drum mag on a random LMG i put together
Sweet merciful shitballs that is incredible. Do you think you'd be able to make a profile pic of the F4 Phantom? It'd be a challenge because of the deep gull wings.toryu said:SU-25
*Bows down*toryu said:TOS-1 "Buratino"
Stryker APC
Amazing. How long does this take you to make one?
Been a while... DAMN!!! I love you grenade launcher. And I like the LMG too.mb16 said:a few i have made over the last month
FAL or G3 that i tried to make
a random 9mm SMG
6 chamber grenade launcher
my first try at a drum mag on a random LMG i put together
It depends on how many parts I have already made before. Stryker took about 2.5 hours. Buratino took about 45 min, because I already had some T-72 chassis lying around. + of course some time for the camo. But I'm not able to assess it because I was not making it continuously.Sn1P3r M98 said:
-------------------------
BRDM-X
Slightly modernized BRDM-2. New bulletproof windows, unmanned tower with KORD machinegun...
Looks a little like the brute sidearm from Halo. Pretty awsome looking.Sn1P3r M98 said:I decided to extend my Rattler Series today. I made a PDW aimed at Spec Ops. I call it the Rattler PDW-Spec Op. It fires the .40 S&W round and has drop free magazines, but I included a finger hole to pull them out if they get stuck. It has an MP5 style charging handle and has a firing rate of 850-900 RPM. I included an Aimpoint for ease of target acquisition at close range. I also made a stripe camoed version, and a normal version. Which do you guys prefer?
Oh, and crits are totally accepted and more than welcome.
Thanks! Just FYI I created it totally from scratch; there was nothing to inspire me, but that's sort of cool if I unknowingly recreated thatCplDustov said:Looks a little like the brute sidearm from Halo. Pretty awsome looking.Sn1P3r M98 said:I decided to extend my Rattler Series today. I made a PDW aimed at Spec Ops. I call it the Rattler PDW-Spec Op. It fires the .40 S&W round and has drop free magazines, but I included a finger hole to pull them out if they get stuck. It has an MP5 style charging handle and has a firing rate of 850-900 RPM. I included an Aimpoint for ease of target acquisition at close range. I also made a stripe camoed version, and a normal version. Which do you guys prefer?
Oh, and crits are totally accepted and more than welcome.
New submission,
The Titan Heavy Machine Gun 94. This can be fitted with a bi-pod, can be mounted to a vehicle, and can be carried, by soldiers (though in those cases, said soldier will be also equiped with powered armor and are acting in fashion to walking tanks.) It uses .50 calibur rounds, and the charging handle can be rmoved and placed on either side (as seen here, its mounted on the Left side, and the little part you see more for keeping the handle in. It has conventional sights, but the version shown here is modified with a laser designator, and the standard sights removed.
Crits are welcomed, this is one of the largest codes Ive had yet, and I believed this actually beats the previous entry that I said that about...
The Titan Heavy Machine Gun 94. This can be fitted with a bi-pod, can be mounted to a vehicle, and can be carried, by soldiers (though in those cases, said soldier will be also equiped with powered armor and are acting in fashion to walking tanks.) It uses .50 calibur rounds, and the charging handle can be rmoved and placed on either side (as seen here, its mounted on the Left side, and the little part you see more for keeping the handle in. It has conventional sights, but the version shown here is modified with a laser designator, and the standard sights removed.
Crits are welcomed, this is one of the largest codes Ive had yet, and I believed this actually beats the previous entry that I said that about...
It's called the spiker. If you google "brute weapons" it comes up in images. The only thing missing from yours would be the dual "bayonets".Sn1P3r M98 said:Thanks! Just FYI I created it totally from scratch; there was nothing to inspire me, but that's sort of cool if I unknowingly recreated thatCplDustov said:Looks a little like the brute sidearm from Halo. Pretty awsome looking.Sn1P3r M98 said:I decided to extend my Rattler Series today. I made a PDW aimed at Spec Ops. I call it the Rattler PDW-Spec Op. It fires the .40 S&W round and has drop free magazines, but I included a finger hole to pull them out if they get stuck. It has an MP5 style charging handle and has a firing rate of 850-900 RPM. I included an Aimpoint for ease of target acquisition at close range. I also made a stripe camoed version, and a normal version. Which do you guys prefer?
Oh, and crits are totally accepted and more than welcome.
That's cool! Nice blending with those handguards too. The ammo box is also very appealing. I really like the gun.WanderingFool said:New submission,
The Titan Heavy Machine Gun 94. This can be fitted with a bi-pod, can be mounted to a vehicle, and can be carried, by soldiers (though in those cases, said soldier will be also equiped with powered armor and are acting in fashion to walking tanks.) It uses .50 calibur rounds, and the charging handle can be rmoved and placed on either side (as seen here, its mounted on the Left side, and the little part you see more for keeping the handle in. It has conventional sights, but the version shown here is modified with a laser designator, and the standard sights removed.
Crits are welcomed, this is one of the largest codes Ive had yet, and I believed this actually beats the previous entry that I said that about...
A while back, I made a top loading Grenade launcher. Looked at it again, and didnt like it that much, so I redisigned some of it.
Some of the changes:
-added a lever on the bottom that opens the grenade breach.
-moved leaf sight up on to the barrel itself, now looks more like other grenade launchers
(also, most GLs which design I used as a base do not have a second sight, from what I could see.)
-changed the stock.
Crits are welcomed.
Some of the changes:
-added a lever on the bottom that opens the grenade breach.
-moved leaf sight up on to the barrel itself, now looks more like other grenade launchers
(also, most GLs which design I used as a base do not have a second sight, from what I could see.)
-changed the stock.
Crits are welcomed.
I like it. The RIS is a nice touch.WanderingFool said:A while back, I made a top loading Grenade launcher. Looked at it again, and didnt like it that much, so I redisigned some of it.
Some of the changes:
-added a lever on the bottom that opens the grenade breach.
-moved leaf sight up on to the barrel itself, now looks more like other grenade launchers
(also, most GLs which design I used as a base do not have a second sight, from what I could see.)
-changed the stock.
Crits are welcomed.
One thing, its a little bit nit pickySn1P3r M98 said:I like it. The RIS is a nice touch.WanderingFool said:A while back, I made a top loading Grenade launcher. Looked at it again, and didnt like it that much, so I redisigned some of it.
Some of the changes:
-added a lever on the bottom that opens the grenade breach.
-moved leaf sight up on to the barrel itself, now looks more like other grenade launchers
(also, most GLs which design I used as a base do not have a second sight, from what I could see.)
-changed the stock.
Crits are welcomed.
but putting a scope on that is counter productive because it doesn't have the range, and because of the extreme ballistic trajectory of 40mm grenades, the second model with the leaf sights is better.
There are a few things that I'd recommend changing about the designs to improve it.CplDustov said:It's called the spiker. If you google "brute weapons" it comes up in images. The only thing missing from yours would be the dual "bayonets".Sn1P3r M98 said:Thanks! Just FYI I created it totally from scratch; there was nothing to inspire me, but that's sort of cool if I unknowingly recreated thatCplDustov said:Looks a little like the brute sidearm from Halo. Pretty awsome looking.Sn1P3r M98 said:I decided to extend my Rattler Series today. I made a PDW aimed at Spec Ops. I call it the Rattler PDW-Spec Op. It fires the .40 S&W round and has drop free magazines, but I included a finger hole to pull them out if they get stuck. It has an MP5 style charging handle and has a firing rate of 850-900 RPM. I included an Aimpoint for ease of target acquisition at close range. I also made a stripe camoed version, and a normal version. Which do you guys prefer?
Oh, and crits are totally accepted and more than welcome.
A lower barrel on the frame would help reduce muzzle climb in an automatic machine pistol, and if the magazine is made to be inserted into the grip, then the ejection port should be toward the rear on the frame.
It's good to see that old 'technical-crit' Sticky is back. Long time no see, boyo.Stickyreiss said:There are a few things that I'd recommend changing about the designs to improve it.CplDustov said:It's called the spiker. If you google "brute weapons" it comes up in images. The only thing missing from yours would be the dual "bayonets".Sn1P3r M98 said:Thanks! Just FYI I created it totally from scratch; there was nothing to inspire me, but that's sort of cool if I unknowingly recreated thatCplDustov said:Looks a little like the brute sidearm from Halo. Pretty awsome looking.Sn1P3r M98 said:I decided to extend my Rattler Series today. I made a PDW aimed at Spec Ops. I call it the Rattler PDW-Spec Op. It fires the .40 S&W round and has drop free magazines, but I included a finger hole to pull them out if they get stuck. It has an MP5 style charging handle and has a firing rate of 850-900 RPM. I included an Aimpoint for ease of target acquisition at close range. I also made a stripe camoed version, and a normal version. Which do you guys prefer?
Oh, and crits are totally accepted and more than welcome.
A lower barrel on the frame would help reduce muzzle climb in an automatic machine pistol, and if the magazine is made to be inserted into the grip, then the ejection port should be toward the rear on the frame.
Could it have a foward ejection port like the F2000? Is that possible in a gun that small?Stickyreiss said:There are a few things that I'd recommend changing about the designs to improve it.CplDustov said:It's called the spiker. If you google "brute weapons" it comes up in images. The only thing missing from yours would be the dual "bayonets".Sn1P3r M98 said:Thanks! Just FYI I created it totally from scratch; there was nothing to inspire me, but that's sort of cool if I unknowingly recreated thatCplDustov said:Looks a little like the brute sidearm from Halo. Pretty awsome looking.Sn1P3r M98 said:I decided to extend my Rattler Series today. I made a PDW aimed at Spec Ops. I call it the Rattler PDW-Spec Op. It fires the .40 S&W round and has drop free magazines, but I included a finger hole to pull them out if they get stuck. It has an MP5 style charging handle and has a firing rate of 850-900 RPM. I included an Aimpoint for ease of target acquisition at close range. I also made a stripe camoed version, and a normal version. Which do you guys prefer?
Oh, and crits are totally accepted and more than welcome.
A lower barrel on the frame would help reduce muzzle climb in an automatic machine pistol, and if the magazine is made to be inserted into the grip, then the ejection port should be toward the rear on the frame.
You'd need to leave space along the top for an ejection tube, and the bolt would probably need redesigning, but it could work.Sn1P3r M98 said:Could it have a foward ejection port like the F2000? Is that possible in a gun that small?Stickyreiss said:There are a few things that I'd recommend changing about the designs to improve it.CplDustov said:It's called the spiker. If you google "brute weapons" it comes up in images. The only thing missing from yours would be the dual "bayonets".Sn1P3r M98 said:Thanks! Just FYI I created it totally from scratch; there was nothing to inspire me, but that's sort of cool if I unknowingly recreated thatCplDustov said:Looks a little like the brute sidearm from Halo. Pretty awsome looking.Sn1P3r M98 said:I decided to extend my Rattler Series today. I made a PDW aimed at Spec Ops. I call it the Rattler PDW-Spec Op. It fires the .40 S&W round and has drop free magazines, but I included a finger hole to pull them out if they get stuck. It has an MP5 style charging handle and has a firing rate of 850-900 RPM. I included an Aimpoint for ease of target acquisition at close range. I also made a stripe camoed version, and a normal version. Which do you guys prefer?
Oh, and crits are totally accepted and more than welcome.
A lower barrel on the frame would help reduce muzzle climb in an automatic machine pistol, and if the magazine is made to be inserted into the grip, then the ejection port should be toward the rear on the frame.