That is much better, but using 50 cal has still worked against you. Your magazine is still to big, the ejection port is too small, your bolt can't come back far enough, and the stock/pistol grip is in a weird position.NAHTZEE said:ok laddy here's an improved version
A sonic Screwdriver?XJ-0461 said:
It's not as accurate as I'd like it to be, but I think it's passable.
FIXED IT!-sooperman said:That is much better, but using 50 cal has still worked against you. Your magazine is still to big, the ejection port is too small, your bolt can't come back far enough, and the stock/pistol grip is in a weird position.NAHTZEE said:ok laddy here's an improved version
It's cool and I wish there were a rifle that could use 50 cal, but so far, there isn't.
with no scope)
Bigfootmech said:I tried to make an sa80 (with bayonet) out of the standard parts, good y/n?
Well, on the aesthetic part, being your first is actually, pretty, pretty good. But on the technical part...dbmountain said:a little carbine AR thing I made that uses 5.56 ammo
this is my first creation, aesthetic criticism welcomed! i don't know anything about the technical aspect of guns so that kind of thing would be meaningless to me
thanks, updates are as follows:yocapo32 said:Well, on the aesthetic part, being your first is actually, pretty, pretty good. But on the technical part...dbmountain said:
* You got no ejection port (the part where bullet casings fly off) unless is that thingy on the top, in front of the rear ironsight, then we're cool
* I don't see where the stock is mounted, so yeah, unless is WIELDED into the reciever...
* You have no charging handle
* No handle, so unless you are holding the weapon by the magwell, you will burn your hands
* No gas block, i can't stress this one out enough, without it, the action of the gun will not cycle, and you will have to pull the charging handle every time, and if you see point number 3...
Newp, it's one of the British L96 variants [http://world.guns.ru/sniper/sn06-e.htm], to go with the L85 / SA80 the other has.NAHTZEE said:the gun is a good ol' SV98(or) a GOLmb16 said:what is that from?Stickyreiss said:
Only issue I can see with that one is that it doesn't look like the front and rear sights would actually be aligned if you flipped them up.MaxMees said:Have a look at the bullpup rifle I made not long ago, it was heavily inspired by the L85A2 also.
* The easiest way would be to take one of the two parts called "dust cover" (near the bottom of the category "reciever") and put it on top of a black rectangle, roughly where that second grey shape is above the magazine well.dbmountain said:- i dont know what part i can add that addresses the no ejection port issue
- the stock is on a swivel thing, i just decided to place it on the left-hand side, this update has it on the right-hand side to show you what i mean
- i put on a part called F2000 bolt, i dont know if that takes care of the charging handle issue or not
- added a handguard, thoughts? does it fit well?
- i studied some of the premade guns, let me know if i did the whole gas block thing correctly
Evil Tim said:
Yeah, now that looks nice. Other than bringing the stock back to the front (a folding stock like that will usually be a frame joined to both sides of the gun) and bringing the magazine a tiny bit higher so that lip is touching the base of the mag well, it's basically perfect.dbmountain said:alright, evaluate my makeshift ejection port, charging handle and handguard.
read your edit and adjusted the charging handle. also, i made some changes to the barrel to make it more compact (silencer is now integrated and unremovable)
If you import the gun, the barrel is already under the bayonet... also if you don't know (I have a real live one in my bed - no kidding) the bayonet for the SA80 slots over the flash eliminator and is held that way by a spring - you literally SHOOT THROUGH the bayonet.NAHTZEE said:Bigfootmech said:I tried to make an sa80 (with bayonet) out of the standard parts, good y/n?
oh yeah it's great just put in and actualt barrel under the bayonet and lower the bayonet and it's badass all the way
