Pimp My Gun: Show your Creations [Image Posting tips in the First post]

[LordMalachi]

Here another one after a good amount of boredom:

Spoiler: .44 Magnum modified with stock, silencer, tactical barrel attachment, and a Bioshock-esque clip extension on the side.

I "think" that you'd wanna flip the stock vertically, If it connects at the bottom of the pistol grip. Key word "think".

Spoiler: Red Bull SR

I have created the wonderous sniper edition! lol Featuring a massive 700mm barrel for extreme range and accuracy. But due to it's compact design, it seems much much smaller! The user can enjoy a huge increase in range, accuracy, and even stopping power due to the higher muzzle velocity; and this all with the same sized magazine as it's AR counterpart! Now that's alot of headshots per mag eh? Haha, contact Smithana Arms today to outfit your best sniper with the best weapon!

 

[NimbleJack3]

Here another one after a good amount of boredom:

Spoiler: .44 Magnum modified with stock, silencer, tactical barrel attachment, and a Bioshock-esque clip extension on the side.

I "think" that you'd wanna flip the stock vertically, If it connects at the bottom of the pistol grip. Key word "think".

-snip-

Also, only specially-designed revolvers that are sealed and airtight will function with a suppressor. Otherwise the gases will just escape through the gap between the [sub]oh god I don't know the name for the bits[/sub] the bit that holds the bullets and the front part of the gun.

 

[Stickyreiss]

Here another one after a good amount of boredom:

Spoiler: .44 Magnum modified with stock, silencer, tactical barrel attachment, and a Bioshock-esque clip extension on the side.

I "think" that you'd wanna flip the stock vertically, If it connects at the bottom of the pistol grip. Key word "think".

-snip-

Also, only specially-designed revolvers that are sealed and airtight will function with a suppressor. Otherwise the gases will just escape through the gap between the [sub]oh god I don't know the name for the bits[/sub] the bit that holds the bullets and the front part of the gun.

like the nagant revolver. the cylinder isn't in a constant seal with the barrel, but as you pull the trigger, the cylinder presses against the barrel for a gas seal

 

[MasterKirov]

Thank you!

Thank you, thank you, thank you for showming me this tool! As soon as I did, I went and created my first gun.

http://img168.imageshack.us/img168/7958/myweaponj.jpg

It started life as a M7 Bushmaster, but it's turned into something else now...

First gun, you say?

I like the disign and you have the right idea about what a gun should look like, now all you need is pratice.

And plenty of Vodka!

 

[Stickyreiss]

Thank you!

Thank you, thank you, thank you for showming me this tool! As soon as I did, I went and created my first gun.

http://img168.imageshack.us/img168/7958/myweaponj.jpg

It started life as a M7 Bushmaster, but it's turned into something else now...

First gun, you say?

I like the disign and you have the right idea about what a gun should look like, now all you need is pratice.

And plenty of Vodka!

real men drink whiskey, straight, no mixers.

 

[mignius]

..

 

[Stickyreiss]

Thank you!

Thank you, thank you, thank you for showming me this tool! As soon as I did, I went and created my first gun.

http://img168.imageshack.us/img168/7958/myweaponj.jpg

It started life as a M7 Bushmaster, but it's turned into something else now...

First gun, you say?

I like the disign and you have the right idea about what a gun should look like, now all you need is pratice.

And plenty of Vodka!

also, fixed your design, staying as true to the original as possible

 

[LordMalachi]

real men drink whiskey, straight, no mixers.
-snip-

Haha nice. I agree completly.

i think that game has gotten alot of traffic because of this thread

Prolly lol. I know it's everywhere on DA too

Spoiler: Red Bull MG Edition

I tried really hard to think of a way to get a belt feed to work with this, but I thought it would be too bulky due to the bullpup-ness. I could be wrong though. But I opted for a larger mag then. With the original being a double stacked, the MG mag is quad stacked. I just did the math in PMG, the original mag would hold 24 rounds to a row, so 48 with one in the chamber, and one in the "slide" (the rotation slide to make the roundns face the right way) so 50 rounds. The MG mag would be 96 plus those two, being a very heavy magazine.

Spoiler: Math?

If I didn't leave enough theroetical room for spring and whatnot then the bullet count is gonna be a lil lower... but I've never really seen the inside of a mag that wasn't single stacked so I'm not sure on how this would even work >.> but I'm sure it can.

 

[jaythedogg]

Interesting thread &hey those pistols are nice, except one thing.... A short barrel gives no high velocities, therefore a scope & butt stock are redundant.

So, essentially sniping pistols with anything less than a 12 inch barrel & lower than a .41 caliber SHORT are fail.

 

[Atvomat_Nikonov]

real men drink whiskey, straight, no mixers.
-snip-

I'll drink to that. Whiskey tastes like vomit mixed.

Spoiler: Keeping on Topic

 

[mcpop9]

on the practical side of the spectrum here's something i whipped up in a in a few minutes
i call it The LRC

and again something i have no idea what it is. just an idea

 

[LordMalachi]

on the practical side of the spectrum here's something i whipped up in a in a few minutes
i call it The LRC

I actually really like that, great bipod idea too, I might try it out sometime

 

[Stickyreiss]

Interesting thread &hey those pistols are nice, except one thing.... A short barrel gives no high velocities, therefore a scope & butt stock are redundant.

So, essentially sniping pistols with anything less than a 12 inch barrel & lower than a .41 caliber SHORT are fail.

FN Five seveN gets 2600 FPS and is a 5.7mm caliber, buttstock helps with steady aiming and managing recoil for faster followup shots, and scopes on pistols are totally legit. also, this app and thread are for fantasy weapons. try not talking talking out of your ass next time.

 

[hittite]

continuing my series of sci-fi guns. This ones not as good as the last one.

Spoiler

 

[Stickyreiss]

So; I just looked back at all my posts in this thread. Wow, I was a dick, sorry.
I got a present to try to make it up to you.

 

[TheSentinel]

Spoiler: The Full Line of SAF Masako Rifles

From Top to Bottom:

1. SAF Masako Mk.1-Standard Infantry Bullpup Rifle

2. SAF Masako Mk.1 Grenadier-Close Range Support

3. SAF Masako Mk.1 H-BAR/Marksman-Sniping

4. SAF Masako Mk.2-Standard Infantry Bullpup Carbine

5. SAF Masako Mk.2 Spec. Ops-Special and Black Operations.

 

[LordMalachi]

So; I just looked back at all my posts in this thread. Wow, I was a dick, sorry.
I got a present to try to make it up to you.
-snip-

Hey, I can't talk for everyone, or for every situation. But Honestly that's part of why I like you, part of your "dickishness" was from how blunt you were. Some of us need bluntness in our critiques, may they be releated to our work or not.

Spoiler: The Full Line of SAF Masako Rifles

From Top to Bottom:

1. SAF Masako Mk.1-Standard Infantry Bullpup Rifle

2. SAF Masako Mk.1 Grenadier-Close Range Support

3. SAF Masako Mk.1 H-BAR/Marksman-Sniping

4. SAF Masako Mk.2-Standard Infantry Bullpup Carbine

5. SAF Masako Mk.2 Spec. Ops-Special and Black Operations.

Very nice, I like, i do. The marksman rifle seems just a tad out of place "looks" wise, but I'm not sure why atm. Still great, just ... idk. I'll explain more if I figure it out better lol. Keep it up ^.^

 

[LordMalachi]

I got bored woo!

Spoiler: Smithana Arms Advertising